St. Paul, MN - Satellite Sheetmetal Tech

With limited supervision, the Satellite Sheetmetal Technician fabricates and installs aircraft parts and assemblies in accordance with FAA requirements, GDMR-101, DUN-A-1, and other approved procedures in a safe, clean, and organized work area.

Essential Job Functions

1. With limited supervision, fabricates parts, assemblies, and antenna doublers from sheet metal, stainless steel, and composites using correct fasteners in accordance with the DUN-A-1 and other related approved documents and procedures.

1. With limited supervision, installs fabricated parts, assemblies, and antenna doublers in specified aircraft locations in pressurized and non-pressurized aircraft. Identifies engineering discrepancies and works with Satellite Leadership and Engineering team members to find alternate solutions as needed.  Identifies locations for secondary avionics system components such as relays, terminal strips, terminal blocks, heat sinks, etc. Displays adequate troubleshooting skills.

1. With limited supervision, disassembles and reassembles aircraft interior, instrument panels, and avionics equipment bays prior to and/or following the installation of aircraft, using proper handling and storage techniques.

1. With limited supervision, performs appropriate corrosion control process upon completion of parts and fixtures before installation in aircraft.

1. With limited supervision, enters a description of work completed on the work order and other required paperwork, documents all removal and installation of aircraft parts and accessories according to Installation procedures, and maintains personal training log.

1. Demonstrates knowledge and use of technical reference materials, i.e., aircraft technical manuals, parts catalogs, fabrication and specification manuals, and AC 43-13.

1. Maintains current industry, equipment, and FAA knowledge by attending factory classes OJT and by researching and reading technical documents, trade publications, FAR’s, etc. Assists lesser-experienced technicians in interpreting Company policies and the FAR’s.

1. Available to work all department alternate shifts as needed and accomplish road trips within the United States and other countries as needed.

1. Performs other related duties as assigned by management.

Job Specific Requirements

• Licenses/Certificates: Respirator fit eligible. Must have a valid Driver’s License and an acceptable driving records
• Attendance: Regularly scheduled attendance required
• Physical: Routinely lifts 50 lbs.; reads small print; repetitive motion; works with moving parts and vibration; works in confined spaces; works in heights above four feet; tolerates products and materials associated with component maintenance; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting
• Environmental: Tolerates working in extreme temperatures and noisy environments

Education and Experience

Satellite Sheetmetal Technician I

• High School graduate or equivalent required
• One-year previous sheetmetal, aircraft structures, fabrication or related experience required

Satellite Sheetmetal Technician II

• High School graduate or equivalent required
• Two years previous sheetmetal, aircraft structures, fabrication or related experience required

Satellite Sheetmetal Technician III

• High School graduate or equivalent required
• Three years previous sheetmetal, aircraft structures, fabrication or related experience required

The typical hourly starting pay range for positions in this job family in the state of Minnesota follows. Please note that the actual hourly rate may vary depending on factors including, but not limited to, market conditions, location, experience, skill level and shift.

Job Title

Typical Pay Range

Satellite Avionics Technician I

$32.40-36.50/hour

Satellite Avionics Technician II

$35.40-41.10/hour

Satellite Avionics Technician III

$39.60-46.75/hour

Total compensation includes the following benefits: a comprehensive benefits package (Medical, Dental, Vision, Vacation/Holiday), relocation assistance for those who qualify, 401(k) contribution, tool account program, in-house training, and tuition assistance.

Available Benefits

• Moving is expensive and hard work! Relocation Assistance is available for those that qualify.
• Duncan offers a comprehensive Benefits Package (Medical, Dental, Vision, Vacation/Holiday) that is available to team members on day one.
• Plan for your medical needs with a Health Savings Account (employer and employee contributions).
• Save for your future through our 401(k) program where you can begin contributions within your first 45 days, 50% match on first 6% contributed
• Enjoy Duncan Aviation’s On-Site Fitness & Health Clinics at the MRO locations
• Take advantage of a variety of In-House Training opportunities, or use Tuition Assistance to further your education.
  
  

Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled